Spareparts Pete Packer Underwear Brief Review

August 05th, 11   •   Posted by Mistress Kay   •   1 Comment
Spareparts Pete Packer Underwear Brief

Front of packaging

The Pete Packer Underwear Brief is a packing cock harness sold by Babeland Toys and made by Spareparts Hardwear. The harness comes in Small through 3XL sizes, and ti’s made from 88% Nylon and 12% Spandex. The packing harness gives the ability to have the packer directly against the skin or have it covered, and it works as a Stand To Pee harness as well.

The packaging us very basic, but it’s also very helpful. This packing cock harness comes in a plastic, resealable bag. The underwear can easily be removed from the packaging, and on the back-side, there’s information about the size chart as well as a page of instructions on the optional features of the harness as well as how to use it. The bag can be resealed and used for long-term storage of the underwear if you’d like, but I’ll just be keeping mine in my underwear drawer.

Spareparts Pete Packer Underwear Brief

The size chart. BEWARE as this is a large picture!

I think these Pete packer panties were LONG overdue. The internet (and gender-bending lovers) needed them! There are some packing straps out there, but I don’t know if there are any packing panties. I certainly don’t know if there are any that go above an XL in sizing, and the Pete underwear line actually goes up to a 3XL, so if you are a bigger gal/guy who likes to pack, you’re in luck.

The Pete Packer Underwear Brief is only one of the new packing panties that Spareparts is selling. The Pete line is their new line of underwear made for any sex that is intended to hold a packing penis safely and securely in place for both foreplay and day-to-day use. In fact, you can purchase these in 3-packs just because they really WERE meant to be replacements for your underwear when you wanted to wear them. There are different styles of the underwear. You can get a full boxer-trunk look, a boyshort-type look, a jock-strap look, or a commando look.

These are extremely easy to put on. You just slip it onto your body! That’s it! I recommend inserting the packing penis first (instructions below), but once you do, the underwear slips onto your body like your favorite pair of panties. There’s no struggle and no problems.

Spareparts Pete Packer Underwear Brief

The underwear laying flat

They run true to size, but I must say that I am a bit disappointed in their sizing. In the size chart (which I provided for you through a picture in this review) only includes waist measurements. For a male,a waist-only measurement *may* be okay, as most of the time as many males have a similar waist and hip measurement, but I do wish Spareparts would include (maybe on their manufacturing website), hip measurements as well. Many people are built differently, and for me, there is a 15 inch difference between my waist measurement and my hip measurement while someone else may only have a 2 inch difference. I’d love to see hip measurements added to their size chart at some point. As for me, the 3XL does fit true-to-size, and I wear a women’s size 28, and it fits comfortably on me.

Spareparts Pete Packer Underwear Brief

Showing the inside flaps and elastic band to hold your packing cock in

Packing in them does take a bit of learning, but Spareparts does include a 20-step guide (all with pictures and captions) to teach you all of the different ways that you can use your Spareparts Pete packing cock harness. Most of the steps are just pictures or optional steps, but it’s neat to know how to use your packing harnes! Basically, you insert the packing cock through the packing cock hole. It’s that simple! Once you do that, though, you have tons of options. You can attach the elastic strap to keep it in place for extra security. You can also fold the back panels around the base of the packing cock if you don’t want direct contact with the cock, or you can leave the panels to the side if you do want direct contact. You can leave your packing penis, on the outside, outside of the packing pouch when you want to use it as a Stand-To-Pee device or just want to show it off, or you can tuck it into its front pouch just like you could with a real penis and briefs. The same directions apply to all of their line of Spareparts Pete packing underwear, so if you want to purchase all of the designs, you’ll already know how to use them! How amazing is that?

Spareparts Pete Packer Underwear Brief

The outside hole to be able to use Stand to Pee devices

How well do they pack? Surprisingly and amazingly well! I’ve have absolutely no issue with the packing cock feeling loose or falling it. It stays exactly in place, and when you pull down your underwear to use the bathroom, they don’t fall on the floor (or worse! in the toilet!) That’s amazing for me. I love it. The underwear doesn’t hold erect cocks amazingly well for penetratino though – the cocks will move around. It holds soft, packing cocks just fine, but for penetration and sex, you may want to switch to their other harnesses. On the bright side, I’ve worn my Spareparts Joque harness under this underwear, and it is still really comfortable and causes no issue, so if you want to use this underwear for foreplay, you can easily transition to the sex by wearing a (thin!) harness underneath. Be careful not to catch the fabric of the underwear on the harness though.

The Spareparts Pete packing underwear is surprisingly comfortable as well. It “breathes” with no issue, and you won’t feel disgusting or sweaty if you wear this all day. It fits just like their harnesses do, and it feels just like a second skin when you’re wearing it. They aren’t too tight on the skin, and aside from being a bit baggier where the packing cock goes in the front, the packing panties feel just like a regular pair of panties would. Aside from being able to pack a packing cock, these panties are just plain comfortable! I’m impressed.

Spareparts Pete Packer Underwear Brief

The underwear laying inside out

For cleaning, it does give instructions. You can hand or machine-wash this underwear in cold water. You can use mild soap but no bleach or fabric softener. Also, it should beline dried, but instead, it should be laid flat to dry, and it should never be ironed. Depending on how long you wear it at a time (and what you do in it), you might need to wash it after every use, so I’m glad that it’s so easy to clean. If I just wear it for foreplay, it may not need it, but when I wear it for a full-day, it definitely needs to be washed just like a regular pair of underwear.

Overall, I’m in LOVE with the Pete Packer Underwear Brief. Many of the other packing options don’t fit a plus-size gal, and I’m so happy that Spareparts has now made it easy to go, throughout your day, while wearing a packing cock. Seriously, how did I every use my packing cock before without this packing brief? It makes packing as natural as if I actually owned a penis, and for that, Spareparts, you have my eternal thankfulness. Thanks to Babeland Toys for sending me this transgender harness for my Spareparts Pete Packer Underwear Brief review.

1 Comment on "Spareparts Pete Packer Underwear Brief Review"

Unrepentant says...
August 05th, 2011

How did you get this to review? I didn’t see it up as a review item on Babeland’s website..




COMMENT

CommentLuv badge